Steel Products

Long Products

Rebars

Standards: ASTM, BS, DIN, AFNOR
Diameter: 6 to 40 mm
Length: 6 to 12 meters Straight and Once Folded

Wire Rods

Standards: ASTM, BS, DIN, AFNOR
Diameter: 5,5 to 25 mm

Equal Angles

Standards: DIN, EN, ASTM
Size: 20x20x3 to 200x200x24 mm
Length: Maximum 12 meters

Flat Bars

Standard: DIN, EN, ASTM
Size: 10×3 to 200×20 mm
Lengths: Maximum 12 meters

Square Bar

Standards: DIN, EN, ASTM
Size: 6 x 6 to 80 x 80 mm
Lengths: Maximum 12 meters

Round Bar

Standards: DIN, EN, ASTM
Size: 8 to 120 mm
Lengths: Maximum 12 meters

T Bar

Standards: DIN, EN, ASTM
Size: T20X3 to T140X15 mm
Lengths: Maximum 12 meters

UPN

Standards: DIN, EN, ASTM
Size: UPN40 to UPN400
Length: Maximum 12 meters

UAC

Standards: DIN, EN, ASTM
Size: UAC 30 to UAC 70
Length: Maximum 12 meters

PFC

Standards: DIN, EN, ASTM
Size: PFC 75X40X6 to PFC 00X100X46
Length: Maximum 12 meters

IPN/IPE

Standards: DIN, EN, ASTM
Size: UPN40 to UPN400
Length: Maximum 12 meters

HEA/HEB

Standards: DIN, EN, ASTM
Size: HEA 100 / HEA 100 up to HEA 500 / HEB 500
Length: Maximum 15 meters

Annealed Wire

Diameter: 0,80 to 7,00 mm
Coil Weight: 10 kg up to 1.000 kg

Galvanized Wire

Diameter: 0,80 to 10,00 mm
Zinc Coating: 30-380 g/m²Coil
Weight: 100 – 1.200 kg

Hollow Sections

Standards: EN 10219, EN 10210, ASTM A 500, AS/NZS 1163
Size: 10X10X 0,70 mm to 250X250X10 mm
Length: Maximum 12 meters

Hot Rolled Coils / Sheets

Grades: DD11, DD12, DD13, S235JR, S275JR, S355JR/JO/J2, SAE 1006-SAE 1008 – SAE 1010, S275M-S460M, S315MC – S700 MC, 28Mn6, 20,MnB5, 30MnB5
Thickness: 1,2 mm to 25 mm
Width: 900 to 2.000 mm

Cold Rolled Coils / Sheets

Grades: DC01 – DC06, DC01EK – DC04EK, H260LA – H420LA
Thickness: 0,25 to 3,00 mm
Width: 600 to 1.550 mm

Galvanized Coils / Sheets

Grades: DX51D+Z – DX57D+Z, S220 GD+Z – S550GD+Z
Thickness: 0,25 to 4,00
Width: 400 to 1.550 mm
Zinc Coating: 50-600 gr/m2

Prepainted Coils/Sheets

Thickness: 0,25 to 1,2 mm
Width: 800 to 1.500 mm

Tin Plate Coils/Sheets

Thickness: 0,16 mm up to 0,60 mm-Single Reduced
0,12 mm up to 0,30 mm – Double Reduced
Width: 700 mm up to 1.250 mm
Coating: 1,1 to 11,2 g/m2

Eye Drop/Chequred Plates

Thickness: 1,4 mm up to 16 mm
Width: 800 mm up to 1.500 mm
Length: 2.000 mm up to 12.000 mm

WELDED STEEL FABRIC

Sizes:
From 5 mm to 12 mm diameter, in 0.5 mm increments. Maximum Dimensions:
Length: 12 m, Width: 2.80 m.
Pitches:
Between longitudinal wires: multiples of 50 mm. Between transverse wires: multiples of 50 mm.
Overhangs :
Minimum longitudinal: 50 mm. Minimum transverse: 25 mm.

EXPANDED METAL MESH

Expanded metal mesh is a type of sheet metal
that has been cut and stretched to form a regular pattern of mesh-like
material. It is commonly used for fences, grates, and as metallic lath to
support plaster or stucco.